Hi everyone, racking my brain on this one. I'm running MLPPP with 2 x DSL modems. I have each modem plugged into an interface on the UTM. So only have 3 ports running, 1 x Internal and 2 x modem facing (single logical MLPPP). I know each modem is configured for 192.168.x.1 /24. Modem 1 is 1.1, and Modem 2 is 2.1. My internal network is a 10's address. I'm trying to be able to access the 192.xxx modems from my 10's network. Since UTM's implementation of MLPPP is, well weird (In the other 2 firewalls I tried you create 2 ethernet ports with IP addresses etc., then you ADD PPPoE/MLPPP to those ports - easy!). I can't find a way to access these modems without either 1) disconnecting them and plugging them directly into a laptop, or 2) getting another switch to plug all the modems and UTM WAN interfaces into just to 'fudge' getting access to the modems. I tried using "Additional Addresses" on the MLPPP interface, but no joy. Any help would be greatly appreciated!
↧