I figured out my problem, the UTM does not detect a vnic, so traffic would never go through it. What surprises me is that with all the other VM I have and software I have tried it works the way im trying to configure it. Even VMware docs state the 2 devices are on the same vswitch with the same port group, they bypass the nic and communicate directly as the nic is not required. Now I need to figure out how to get the device to work without a physical nic on the middle vswitch. . **********UPDATE************* Check your settings!!!!! I can't believe I overlooked the little stuff. Seems that I should have checked my VM configs as the network adapter was set to on when the VM starts but not connected. I guess when I deleted the previous one, I did not even pay attention to the settings.
↧