I need some advice about how to setup different (and more secure) web filter profiles based on my network. I currently have a LAN with about 30 PC's + servers + printers on a 192.168.0.xx subnet and its plugged into eth0 on my SG135w UTM 9 (DHCP for the LAN is supplied by my Active Directory Domain) I also have a WiFi network on a 192.168.10.xx subnet which is plugged into eth2 on the appliance (the WiFi access is supplied by a separate wifi system, but the appliance does supply IP address for everyone on the WiFi subnet. Eth1 is the WAN port for the network. I am trying to make sure there is no routing between the two subnets, which is my first problem. Secondly the SG135w is in my Active Directory domain and I want to enable AD authentication for the LAN PC's and to stop using transparent mode. But I don't want it to effect the WiFi (at least not yet) But I am not sure how to have one network using Standard Mode and one network using Transparent Mode, I can see that I can create different profiles but how do I setup the "Default Web Filter Profile" so other profiles can be used for the different networks? Cheers....
↧