Quantcast
Viewing all articles
Browse latest Browse all 120649

Forum Post: RE: SSD usage and life, data

smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.8.13.15-27.ge4e9011-smp64] (openSUSE RPM) Copyright (C) 2002-11 by Bruce Allen, smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SanDisk based SSDs Device Model: SanDisk SDSSDP064G Serial Number: redacted LU WWN Device Id: redacted Firmware Version: 2.0.0 User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Sun Apr 3 12:58:29 2016 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 12) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 24017 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 25 171 Program_Fail_Count 0x0002 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0002 100 100 000 Old_age Always - 0 173 Avg_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 95 174 Unexpect_Power_Loss_Ct 0x0002 100 100 000 Old_age Always - 17 187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 0 230 Perc_Write/Erase_Count 0x0002 100 100 000 Old_age Always - 316 232 Perc_Avail_Resrvd_Space 0x0003 100 100 005 Pre-fail Always - 0 234 Perc_Write/Erase_Ct_BC 0x0002 100 100 000 Old_age Always - 924 241 Total_LBAs_Written 0x0002 100 100 000 Old_age Always - 4162601315 242 Total_LBAs_Read 0x0002 100 100 000 Old_age Always - 1443621688 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Viewing all articles
Browse latest Browse all 120649

Trending Articles