Hi folks, following some promting from Luk I did a detailed investigation of my SFM. 1/. VM tools not running or not supported. 2/. Reason why my XG originally registered was I had two interfaces operational. 3/. after registration I disabled the 2nd interface on the UTM even though the selected interface had the correct gateway it still goes out the initial interface (confused so you should be) 4/. Unable to edit the VM to remove an interface, fails. 5/. the SFM does its own NAT between interfaces which I cannot find a way of disabling. 6/. cannot delete interfaces or disable interfaces in the SFM and all must have IP addresses assigned. 7/. no logging of the SFM,the only way to see what is happening is through the console and tcpdump. 8/. vmtools not being supported means no control of the vmguest from the Vconsole. The SFM never shutsdown I will re-address some of th einterfaces and see if that makes the SFM receive traffic. My real world experience so far.
↧