have fixed this.. I needed to clear the IPS instances within the console of the XG. Using the command ‘set ips ips-instance clear’ I was able to purge the config that had 1 ip instance with 2 CPU. After the clear i then set a new IPS Instance using the command ‘set ips ips-instance add IPS CPU 1' Once I did this I was able to start the IPS Engine and then perform and Pattern Update which downloaded the correct sigs. I’ll be interested to see of others ‘set ips ips-instance add IPS CPU 1’ - using TAB to autocomplete the line after the CPU and before entering an number, I’d be keen to see what CPU configuration it allows… my SG125w says the options are 0 (zero) and 1.
↧