Forum Post: RE: TMobile CellSpot
Dave, what a drop-packet-capture "host ip" will produce? Otherwise use a tcpdump to see what is happening on the connection for that ip/port.
View ArticleForum Post: RE: I am unable to get internet traffic through the UTM.
3. All other server traffic (non-vm) I had disconnected the router from the switch but nothing changed. If you look at my OP I explain my current setup which is what the diagram is for. I can make...
View ArticleForum Post: RE: Discover Mode - Applications not detected
I think we're hoping the next week or two.
View ArticleForum Post: RE: I am unable to get internet traffic through the UTM.
[quote user="William Warren"] You are misconfigured: In your scenario the netgear has to be treated like it is the wan device not a router as far as what the UTM sees. 1. external is fine 2. disconnect...
View ArticleForum Post: How to set up VLANs - terminology and process
Hello, I'm sure this will be very simple once I understand Sophos nomenclature, but until then I'm dead in the water. I have a very simple network setup - the Sophos UTM SG115w provides DHCP, DNS and...
View ArticleForum Post: RE: Fix for Pending Access points stuck at 'Loading'?
They tried a couple times to get me to move to UTM9 software to resolve. Now it's finally being escalated.
View ArticleForum Post: RE: Country Blocking Not Working for a WAN > LAN Rule
Ben Verschaeren , you win! That's too bad that this doesn't work out of box however sending the packets of to Neverland is a decent workaround. Thanks for your help! I'll keep an eye out for v2. You...
View ArticleForum Post: RE: Mac OSX update 10.11.4 breaks the Cisco IPSec Client
Do you want logs from XG or from my client? FYI I have a case opened #5832816 and have provided several logs. What I may have found is that Apple has updated the DH to group 14 and does not connect...
View ArticleForum Post: RE: Mac OSX update 10.11.4 breaks the Cisco IPSec Client
One other thing, I have also filed a bug with Apple but I have not heard back on that yet.
View ArticleForum Post: Full Transparent, VLANs, and Policies...things aren't working.
I am currently testing a Sophos UTM in full transparent bridge mode. I have a 5 VLANs passing through the bridge. I need to apply different policies to each of them. Before turning on web protection,...
View ArticleForum Post: RE: Fix for Pending Access points stuck at 'Loading'?
[quote user="lferrara"] it seems that we will get V16 directly instead of MR2. See this thread: [/quote] Just an FYI...that is not the case at all MR2 is on its way, probably another week or two.
View ArticleForum Post: RE: TMobile CellSpot
Have you tried moving your allow all network rule from the bottom to the top?
View ArticleForum Post: RE: Bridge web protection transparent block traffic http/https
I'm having the same problem. As soon as I allow "any" for Web filtering, Web traffic stop, but I'm still able to icmp, ftp, rdp, etc. I do not have an IP or gateway configured on the bridge interface...
View ArticleForum Post: Auto Firewall Rule Creation Not Working
I created a new NAT rule to route SMTP traffic to a mail relay server, checked the box to auto create the FW rule, but the rule isn't there when I look on the FW side. There is already a NAT that is on...
View ArticleForum Post: RE: UTM 9.4 Home Edition - High CPU load
[quote user="NashBrydges"] If you have Endpoint installed on any PCs or servers, do yourself a favor and disable the Endpoint Web Control then wait a couple minutes and run ATOP again and see where...
View Article