Forum Post: RE: Recommend some good aftermarket wireless routers / APs to...
AP15? www.amazon.com/.../ref=sr_1_1
View ArticleForum Post: ASG 425 Display with homelicense
Hello, I'm using the ASG 425 Rev3 (Core2Duo E6400) Hardware Appliance in a private Network. I got the Home-License running achieved through deleting the ASG File in /etc Folder. Since i did that, the...
View ArticleForum Post: RE: RED
Do you want the remote network internet traffic to go through the UTM? Does the remote location handle it's own DHCP? Transparent/Split should work in this instance. You would have to enter the network...
View ArticleForum Post: RE: awarrenhttp high cpu usage?
Ok here you go, it appears to happened again. The log is filling up with the following at a very high rate: 1447535638.125233020 [ 2516/ (nil)] dns.c:613 dns_poll dns: Bad file descriptor...
View ArticleForum Post: RE: IPSEC VPN site to site with UTM, wont connect at all???
OK So I got the IPSEC tunnel connected, but how do I route traffic to the remote subnet? On UTM RED I had interfaces to route via. How do i do this with IPSEC? Thanks JK
View ArticleForum Post: RE: Realtek 8168 driver
One of the newer intel chipsets or a broadcom version will work well. I can't find anywhere to check hardware on my home version. I do know there are a later intel chipset, but which ones? Ian
View ArticleForum Post: RE: Unable to use Sophos Access Points with XG Firewall?
Hi folks, there is a new AP firmware release which has been automatically installed on my SF-OS which fixed the error message issue. My AP10 is now recognised and I have activated it. Ian M
View ArticleForum Post: RE: How do I create a Bridge, LTE (4G) to Ethernet?
Good enough. The context helps. Fairly easy to create a bridge. It's done at Interfaces & Routing > Bridging > Status. Enable bridging, select the interfaces that will be part of the bridge,...
View ArticleForum Post: RE: Things that need to be added/changed here - add your suggestions
It's just detail, but I miss being able to use a keyboard shortcut for submitting a post. Cheers - Bob
View ArticleForum Post: RE: How do I create a Bridge, LTE (4G) to Ethernet?
I don't have the menu section "Bridging" under "Interfaces & Routing". Is this something not available in v. 9.351-3 (Home use only license)? Sub-sections under "Interfaces & Routing" are:...
View ArticleForum Post: RE: How do I create a Bridge, LTE (4G) to Ethernet?
Sorry, I was using an older version for the path. It's now built into interfaces. From the built-in help: To configure a Ethernet Bridge, proceed as follows: On the Interfaces tab, click New Interface....
View ArticleForum Post: Wireless issues since AP55 Install
I recently purchased an AP55 to replace my old AP30. The AP30 was rock solid and I never had any issues. But now I am dropping 2.4 GHz connections all the time and a power reset of the AP is is the...
View ArticleForum Post: Home licence expiry 9th December 2015, why?
I have been reviewing my latest build using the SF-OS GA version with a brand new home licence. The issue is the licence is shown as expiring on the 9th of December 2015, why when it was only issued a...
View ArticleForum Post: RE: Wireless issues since AP55 Install
What version of UTM are you running and have you contacted support yet (if you have a paid license)?
View Article