Forum Post: RE: setup UTM on laptop after the internet router
Hi, Abdullah, and welcome to the UTM Community! At the top of the forum to which I've moved this thread, you will find one by BarryG where he discusses the best way to use a wireless router with the...
View ArticleForum Post: Step-by-Step L2TP Setup
I am quite frustrated right now. I have, for days, been trying to set up a very simple L2TP VPN Remote Access to my internal network. My Internal LAN is 192.168.3.0 / 24 I want my remote users to be...
View ArticleForum Post: RE: SFM - I built one
Hi folks, Luk spent a number of hours late last night my time investigating the issues I am having with SFM. Thank you Luk. Conclusion - XG Mr2 and SFM do not work together. Mind you the issue I had...
View ArticleForum Post: RE: SG 310(firmware 9.355-1) between a cisco switch 2960(vlan801)...
Louis, You seem like a warrior, not giving up on this as yet? The same behavior this UTM offered under the bridge, WAN connection exist but no connection between the UTM and the Cisco 2960 switch. In...
View ArticleForum Post: RE: Webpages are not showing correctly - UTM in transparent mode
Sorry for the delay Bob. Finally got a chance to catch this happening again. The images below indicate another website failing to format properly, blocks/drops coming from my laptop and what the page...
View ArticleForum Post: RE: wifi bug on sg105w when ssid is invisible
Hi Dirk, all the sophos SG1xxw models hav the same wifi card on board. when you use the lsusb command in an ssh session on your utm you see all pci/e bus devices. On my sg125w the following entry is...
View ArticleForum Post: USB on front of SG310 - what can it be used for?
I bet the answer is..... for future development (roughly translated means, it's there but unlikely to ever be used by the time the appliance has been superseeded)
View ArticleForum Post: RE: Per user traffic blank?
Dave, what version of XG are you using? I mean MR1 or MR2? Also does a User policy rule exist? I mean LAN to WAN from a clientless-user? Thanks.
View ArticleForum Post: RE: Step-by-Step L2TP Setup
David, no worries! Did you configure already something inside XG? If yes, share some L2TP screenshots and Policy rules too. Cheers.
View Article