Forum Post: RE: Why can't I change the clientless group policies after it has...
Ok, I have found an answer - for Clientless Groups I can't set some policies which I can for Normal Groups.
View ArticleForum Post: RE: How do you create a loopback/hairpin NAT to an Interface IP?
It is technially possible using Linux Kernel but it may be restricted by Sophos engineers for security reasons. I was unable to use NAT this way but it is possible to make a loop connection to a Web...
View ArticleForum Post: RED15 setup Standard / Split and need to NAT a device off the...
I've got a camera system in a remote location and require to monitor it using the remote location IP rather than the traffic traveling back through the RED to the UTM. It still needs to be a UTM...
View ArticleForum Post: RE: XG Roadmap - Still too early?
This is some really piss poor information, I understand you may be under NDA but we need some communication from Sophos.
View ArticleForum Post: RE: Unable to see port designation for web traffic on port 80 and...
Ok, this framework did the trick. Here is what I ended up doing, which works for me. First, in the web filter profiles, I created a new profile to control access for my kids Then, I edited the profile...
View ArticleForum Post: RE: Unable to disable IPv6 NAT
Dano, don't you want 'Going to: Any' in that rule? Cheers - Bob
View ArticleForum Post: RE: Multiple source IPs in a DNAT rule
Hi, Steve, and welcome to the UTM Community! You can use Network Group objects in NAT rules. As a newby, when working with NAT rules, you will want to be aware of #3-#5 in...
View ArticleForum Post: RE: 3rd computer "not secure" and I cannot fix
Hello, A few things: 1. If you force an update by clicking on the shield and click "Update Now". Then open Sophos Home. Hover over About, the last Update time is good? 2. If you open Console. E.g.:...
View ArticleForum Post: RE: Re. Sophos and VirusTotal
You'd need a UTM or access to one. You can install one for free: www.sophos.com/.../sophos-utm-home-edition.aspx Regarding VirusTotal, you might be best to contact them: www.virustotal.com/.../
View ArticleForum Post: RE: How to Handle "message="winbindd request failed ()" ?
First try a reboot, Stephan. If that doesn't fix this, Unjoin your UTM from your domain by re-joining with incorrect credentials. Then rejoin with correct credentials. Did that work for you? Cheers - Bob
View ArticleForum Post: RE: SOPHOS UTM Full transparent Mode, what features will work...
I would think that the second Scenario would come closest to what you want with Web Filtering. Will the Junipers no longer be doing IPS if this is successful? I don't recommend using the SMTP Proxy in...
View ArticleForum Post: RE: External WAN connection goes down but modem is fine.
Did you set the WAN NIC speed/duplex and the modem, too? Cheers - Bob
View ArticleForum Post: RE: Daily Executive Reports stopped arriving
Hi, Steve, and welcome to the UTM Community! It's too bad you didn't come here sooner to see that there's an issue with 9.352. In your situation, I would download config backups for several versions...
View Article