Hiho, also wie ist nun die aktuelle Geschwindigkeit an dem Port1 (WAN), der zur Fritzbox geht? Und wie ist die Geschwindikeit an Port0, der vermutlich deinem internen LAN entspricht? Falls der Port1 zur Fritzbox auf 100 haengt, schau mal in der Fritzbox, ob hier evtl der "Green Mode" aktiv ist...dieser macht dann naemlich nur 100Mbit/s....hier diesen dann sonst deaktivieren... Falls es dann immer noch auf 100 haengen sollte, evtl mal das Kabel tauschen (CAT5 macht nicht immer Gbit....CAT6 hingegen schon)... sollte natürlich beides (Port 0 und 1) auf 1Gbit laufen. Weiterhin hatte ich hier zum Test auch mal die SG115 und mit aktiviertem WebFilter, Dual AV Scan und IPS lag die Geschwindigkeit dort auch limitiert bei ca 100-135Mbit/s. Nachdem ich folgendes getan habe, kam ich auf die native Geschwindigkeit des ISPs von 300Mbit/s. Mal zum Test dann IPS komplett deaktivieren. Falls das der Grund sein sollte (sofern beide Ports auf 1Gbits sync sind), kannst du IPS wieder aktivieren und eine Exception einfügen, welche IPS Scans VOM Internal Netz ausklammert, gib hier dann aber keine Destination an...Source Internal reicht. Und gib bitte egal wie eine Rückmeldung, dass auch andere in Erfahrung bringen können, ob das was gebracht hat... ;)
↧
Forum Post: RE: UTM 9.3 Downloads sehr laaaangsam
↧
Forum Post: RE: XG 105 - 40 users
All depends on the number and complexities of your firewall rules. How much memory is consumed and what is the CPU loads? Ian
↧
↧
Forum Post: RE: Sophos Connect vs DNS
Hello momentum, Thank you for all the data you provided. Yes it is a problem and it will be fixed in the next EAP2 that will likely be out by the end of this month. Regards, Ramesh
↧
Forum Post: RE: Sandboxie as an Invincea product is it included in those with an end of support and maintenance after December 2019 as some users here implied?
I'm wondering the same. Is Sandboxie about to be discontinued?
↧
Forum Post: RE: Sandboxie as an Invincea product is it included in those with an end of support and maintenance after December 2019 as some users here implied?
Same! i need it and i think this is the only software that can do what i want :(
↧
↧
Forum Post: RE: Error Messages SBIE
Barb, thank you - this is indeed weird. I noticed the attempt to download something and did not think this was appropriate, that's why I questioned this here. Based on your answer I now downloaded this file (?) but it does not have any extension, so what program do I need to open this. Again, why is it so difficult to provide automatic answers to these standard error messages now?
↧
Forum Post: RE: Multiple subnets on same LAN
Hi Jelle, thanks for your help. I'm attempting do do what you suggested. When assigned a lan port a static IP(Port4) and then bridge it to the primary lan port it only allows the bridge to have its own address and the settings I entered when it was unbridge ports are discarded. Whats the correct method to bridge 2 lan ports while still maintaining the two subnets? Thank you.
↧
Forum Post: How do you make sandboxie the only browser that runs on a machine ?
I am a strong believer in whitelisting so I think sandboxie is an EXCELLENT security tool. It's straight forward and does the job. My problem is how to ensure everybody use it. You can set alarm when apps are run ourside sandboxie.... but why stop there ? How do you restrict ANY apps runs outside sandboxie ?
↧
Forum Post: [Release Notification] Sophos Connect 1.3 EAP is now available and compatible with the UTM!
Hi Community, We are happy to announce that Sophos Connect v1.3 is available for testing! While Sophos Connect as a whole, is still considered EAP, this is because the overall VPN management experience is not yet to the level we want. The VPN client binaries, are otherwise release quality. That said, the binaries being made available here for testing are an early access (EAP) release. Features Multiple Language support Official support for connections to UTM9 Add ability to run domain logon scripts after the tunnel is established Configure connection-specific DNS Suffix for the TAP adapter if configured via Sophos Connect Admin or pushed via UTM Policy Update CLI command to modify gateway and clear credentials in testing/staging setups Download Links Windows Installer: https://www.sophos.com/Pages/DownloadRedirect.aspx?downloadKey={454D0427-319A-4530-B38F-01B5C15DCA5C} Mac Installer: https://www.sophos.com/Pages/DownloadRedirect.aspx?downloadKey={B3F3D3A9-289F-4938-B5EA-C6CBB7195684} Combined Installer: https://www.sophos.com/Pages/DownloadRedirect.aspx?downloadKey={D35ACE7F-120F-4A45-91B1-0EB170480AC6} [Link to original post] Regards,
↧
↧
Forum Post: RE: Firewall lost connection to Sophos Central
Hi Roger Thommen1 Navigate to the Alerts section in your Sophos Central Admin > click on "Firewall has not checked in with Sophos Central for the past null minutes": Hope that clarifies things better!
↧
Forum Post: RE: XG with two RED 50, one keeps disconnecting
Hi Ed Rubin Sorry to hear about this issue you've been experiencing. Try taking a look at the suggestions provided in the RED technical training KBA . Is there a difference in how your two RED sites are configured?
↧
Forum Post: RE: G Suite connector with webmail blocked
Hi Andrea Pessina You may have to also create an exception for the following URLs that Google listed in their article: https://support.google.com/a/users/answer/2622308?hl=en Regards,
↧
Forum Post: Malware FakeAV-Jo Keeps Showing Up
PC Windows 10 I'll receive a windows pop-up notification to the side that Sophos has detected malware/fakeav-jo and moved it to quarantine. When I open Sophos I see the file briefly in quarantine before it disappears by itself. The pop-up notification of this malware keeps appearing at least 5x in a row with the same message. These episodes also happen about twice a month. What's going on here?
↧
↧
Forum Post: RE: IPSEC VPN, XG and Mikrotik Router
After several tests, everything now works correctly. I had to do some additional things like in the configuration of the vpn in sophos add the local and remote IDs, without that the connection is not made. So far everything is working well. Thanks for the help, I hope it helps someone else to make this configuration.
↧
Forum Post: RE: HTTPS Certificate Option Missing in WAF Creation
Hi Gary Kong Take a look at the discussion in this related Community thread for some troubleshooting suggestions.
↧
Forum Post: RE: IPSec with IP Lists
Hi DoubleQ Good point! Thanks for reaching out and submitting this. I would advise raising this as a suggestion on our Sophos Ideas page for visibility to our product team. Regards,
↧
Forum Post: RE: New Config UTM Home 9.6, a lot of Websites and Services dont work, mostly those with let'encrypt CA. Handling of Certificates Problem
I do not know. Other possibilities: Is your modem giving you the same subnet on the outside of UTM as you are using on the inside of UTM? This cannot work. Do you have a Fritzbox? I know nothing about them, but they seem to be common in Germany. There are many questions in this forum about Fritzbox setup problems.
↧
↧
Forum Post: RE: Firewall lost connection to Sophos Central
2 weeks passed, and Sophos only can ask user to disable the alert notice?
↧
Comment on New Community, New Avatars
good article
↧
Comment on New Community, New Avatars
[url=https://www.google.com/]good article[/url]
↧